Insertion, siipipyörävirtausmittari/annostelija
Tyyppi 8025 / Tunnistenumero 418424
Tuotekuvaus
Annostelulaite sopii etenkin neutraaleille ja heikosti syövyttäville nesteille, jotka eivät sisällä kiintoaineita. Annostelulaitteesta on saatavana erilaisia malleja: Pienikokoinen annostelulaite, joka sisältää siipipyöräanturin, ohjauskaappiin tai käyttöpaikalle asennettava erillinen annostelulaite, johon voi liittää Bürkertin anturit 8020 / 8030 / 8031 / 8041 / 8071 tai muita antureita; Annostelulaitteen yhteydessä voi käyttää antureita, joissa on avokollektorilähtö, Reed-relelähtö tai keloja.
- Tavaroiden koodit
- 90261021
- Maa
- FR
Teknisiä ominaisuuksia
Nimi |
Arvo |
kappale |
---|---|---|
Type | 8025 | |
Product sub-group | Flow rate | |
Flow rate (volume) | Yes | |
Concentration | No | |
Continuous measurement | Yes | |
Dosing | No | |
Switch | No | |
Construction device | Compact | |
Display type | Display | |
Protection class measurement device (IP) | IP65 | |
AC Voltage min. | 115 | V |
AC Voltage max. | 230 | V |
Voltage frequency | 50/60 | Hz |
Battery voltage | No | |
Precision of volume flow rate in relation to reading | 1 | % |
Temperature environment min | -10 | °C |
Temperature environment max | 50 | °C |
Temperature medium min | -15 | °C |
Temperature medium max | 80 | °C |
Nominal pressure (DIN EN 1333) | PN 10 | |
Dynamic viscosity min. | 0 | cP |
Dynamic viscosity max. | 300 | cP |
Detection of flow direction | No | |
Transmitter type | Basic | |
Sensor type | Paddle wheel | |
Paddle wheel type | Magnetic | |
Paddle wheel measuring principle detection | Hall | |
Fitting electronic interface | Insertion 2 (inch) | |
Electrical connection 1 type | Cable gland M20 | |
Electrical connection 1 quantity | 2 | PCE |
Electrical connection 1 gender | Terminal block | |
Electrical connection 1 material category | Plastics | |
Electrical connection 1 material | PA (Polyamide) | |
Electrical connection 1 seal material | Neoprene | |
Output type analog quantity | 1 | PCE |
Output 1 type analog current | 4-20 mA | |
Output 1 digital type | Transistor | |
Output 1 digital transistor connection NPN | Yes | |
Output 1 digital transistor connection PNP | Yes | |
Digital output 1 transistor contactless | 0,1 | A |
Electronics body material category | Plastics | |
Electronics body material | PC (Polycarbonate) | |
Cover material | PC (Polycarbonate) | |
Protection lid material | PC (Polycarbonate) | |
Nut material | PC (Polycarbonate) | |
Front foil material category | Plastics | |
Front foil material | Polyester | |
Seal sensor/housing material | FKM (Fluor rubber) | |
Seal housing/cover material | NBR | |
Protection lid seal material | Silicone | |
Screw material | Stainless steel | |
Fastening part material | PSU (Polysulfone) / PPSU (Polyphenylsulfone) | |
Parametrisation local | Yes | |
Parametrisation separate | No | |
Parametrisation fixed | No | |
sensor holder material composition | Plastics | |
Sensor holder material | PVDF (Polyvinylidene fluoride) | |
Medium-contacting parts seal material | FKM (Fluor rubber) | |
Paddle wheel material | PVDF (Polyvinylidene fluoride) | |
Paddle wheel axle material | Ceramic | |
Bearing material category | Technical ceramics | |
Bearing material | Ceramic | |
Insertion sensor length | long | |
Tropical climate version | Yes | |
Time dosing | No | |
Batch dosing | No | |
Extended diagnosis | No | |
Volumeter | Yes | |
Paino | 1,000000 | kg |