Bürkert
Apuohjattu 2/2-tie kalvoventtiili
Tyyppi 6213 / Tunnistenumero 247882
Tuotekuvaus
Tyypi 6213 venttiili on servo-ohjattu kalvoventtiili. Venttiili avautuu 0-paine-erolla. Vakiomallisena venttiili on tarkoitettu nesteille. Täysi aukiasento edellyttää vähimmäisvirtausta. Kaasu- ja alipainesovelluksille on saatavilla erikoismalli (HP00), joka avaa venttiilin ilman paine-eroa. Erilaiset kalvomateriaalit ovat valittavissa sovellusten mukaisesti. Vakiomallinen messinkirunko on kaikkien eurooppalaisten juomavesivaatimusten mukainen. Muille markkinoille käytettävissä ovat lyijyttömät tai sinkkikadon kestävät messinkilajit. Haponkestävä pesä täydentää runkovalikoiman. Energiatarpeen vähentämiseksi kaikki kelat voidaan toimittaa sähköisellä tehon alennuksella. Magneettikelat puristetaan kemiallisesti erittäin kestävällä epoksilla. Standardin DIN EN 17301-803, muoto A, mukaisilla sähköpistokkeilla venttiilit täyttävät suojausluokan IP65 vaatimukset.
- Tavaroiden koodit
- 84818079
- Maa
- DE
Teknisiä ominaisuuksia
Nimi |
Arvo |
Yksikkö |
|---|---|---|
| Type | 6213 | |
| Operation | servo-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Diaphragm valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 10 | bar |
| Nominal pressure (DIN EN 1333) | PN 10 | |
| Main valve orifice 1 (P) (mm) | 10 | mm |
| Main valve orifice 1 (inch) | 3/8 inch | |
| Kv value (water) | 1,9 | m3/h |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/2 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/2 | |
| Valve seat material | Stainless steel | |
| Medium-contacting part core material | Stainless steel | |
| Medium-contacting part stopper material | Stainless steel | |
| Pilot control material medium-contacting | PA (Polyamide) | |
| Valve body cover material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | NBR (Nitrile rubber) | |
| Sealing toward outside material | NBR (Nitrile rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 80 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 8 | W |
| inrush power consumption AC | 24 | V·A |
| Rated power AC | 8 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | not included | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Protection type NEMA (max. with suitable connector) | NEMA 4X | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | PA (Polyamide) | |
| Coil size | 32 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | B | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 30 | ms |
| Switch time close min | 100 | ms |
| Switch time close max. | 150 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control orifice (mm) | 1,2 | mm |
| Pilot control seal material | NBR (Nitrile rubber) | |
| Pilot control centrally bolted | Yes | |
| Low-noise version | No | |
| Core guide | Sliding ring | |
| Main valve with integrated screen | No | |
| Installation length | 55 | mm |
| Valve construction | Valve complete | |
| Paino | 0,391000 | kg |
Voidaan yhdistää seuraavien tuotteiden kanssa
Sovellukset ja työkalut
Lataukset
Tietolehtiset
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
Type 6213 data sheet | servo-assisted diaphragm valve | 702 kB | EN / EU |
|
|
Typ 6213 Datenblatt | servogesteuertes Membranventil | 858 kB | DE / DE |
|
|
Type 6213 Fiche technique |Vanne à membrane 2/2 voies pilotée | 1 MB | FR / FR |
Käyttäjän oppaat
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6213 | safety shut-off device for combustion installations | 833 kB | EN,FR,DE / EU |
|
|
Additional manual Type AC19 | Solenoid coil AC19, II 2G/D Ex approval | 2 MB | EN / EU |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Návod k obsluze Type 6213 | 2/2-cestný magnetický ventil | 1 MB | / CZ |
|
|
Operating Instructions Type 6213 6281 | 2/2-way solenoid valve | 1 MB | EN / EU |
|
|
Operating Instructions Type 6213 | 2-way solenoid valve, internally piloted | 474 kB | EN / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Service manual Type 6213 | Replacement of coil set and stopper set | 922 kB | EN,FR,DE / EU |
|
|
Supplement Type 6213 | Versions with integrated High-performance electronics | 306 kB | EN / EU |
|
|
Bedienungsaneitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ 6213 6281 | 2/2-Wege-Magnetventil | 1 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 1 MB | DE / DE |
|
|
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | Cewka elektromagnesu, Typ AC10 | 2 MB | PL / PL |
|
|
Instrukcja obsługi Typ 6213 EV, 6281 EV | 2/2-drogowy zawór elektromagnetyczny | 1 MB | PL / PL |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1 MB | IT / IT |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1 MB | PT / BR |
|
|
Manual de operação Bobina magnética tipo AC10 | PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | 1 MB | PT / BR |
|
|
Manuel d'utilisation Type 6213 6281 | Électrovanne 2/2 voies | 1 MB | FR / FR |
|
|
Manuel supplémentaire Type AC19 | Bobine magnétique AC19, homologations II 2G/D Ex | 2 MB | FR / FR |
|
|
Zusatzanleitung Typ AC19 | Magnetspule Typ AC19, II 2G/D ExZulassung | 2 MB | DE / DE |
EU-selvitys
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 5 MB | EN,FR,DE |
Toimiva malli
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
3D-Animation - 6213 | 3 MB | EN |
Mainoslehtiset ja luettelot
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
723 kB | AF | |
|
|
Öljypolttimiin EN ISO 23553-1:n mukainen turvasulkuventtiiliBrochure contains the following types: 6027 5406 5407 6213 | 773 kB | EN / EU |
|
|
Solenoid valves for safety in your plant | 787 kB | EN / EU |