Bürkert - Sinun lähelläsi
Toimisto /1
  • Päätoimipaikka
  • Pääkonttori
  • Järjestelmätalo
  • Jälleenmyyjä
  • Toimisto
  • Tehdas
  • Logistiikkakeskus
bürkert
 

    Tyyppi 6407 / Tunnistenumero 325970

    9000404672.jpeg

    Tuotteen kuva voi poiketa todellisesta ulkoasusta. 

    • 9000404672.jpeg
    • 9000417344.jpeg
    Maa
    DE

    Teknisiä ominaisuuksia

    Nimi
    Arvo
    Yksikkö
    Type 6407
    Operation force-controlled
    Actuator type Plunger valve
    Main valve operating principle Globe valve
    Switch function on/off
    Media separation No
    Valve function A - normally closed - inlet port 1 (P/NC)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 0 bar
    Nominal pressure max (liquid) 10 bar
    Main valve orifice 1 (P) (mm) 13 mm
    Main valve orifice 1 (inch) 1/2 inch
    Kv value (water) 3.4 m3/h
    QNn value (gas) 3650 l/min
    Main valve wetted material Brass
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 1/2
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 1/2
    Valve seat material Stainless steel
    Seat seal material category Plastics
    Seat seal material PTFE (Polytetrafluorethylene)
    Sealing toward outside material Graphite
    Temperature environment max 45 °C
    Temperature medium min -40 °C
    Temperature medium max 150 °C
    Voltage / rated voltage 240 V
    Voltage / rated voltage 240 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    AC voltage Yes
    DC voltage No
    Battery voltage No
    Rated power consumption 16 W
    inrush power consumption AC 140 V·A
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Cable plug in delivery not included
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) 65
    Coil type placed on top
    Coil insulation material category (encasement) Plastics
    Coil insulation material (encasement) Epoxy
    Coil size 42 mm
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Coil special feature for high temperatures
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 100 ms
    Switch time open max. 200 ms
    Switch time close min 300 ms
    Switch time close max. 500 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oxygen version No
    Oil burner valve No
    Steam version Yes
    Low-noise version No
    Main valve with integrated screen No
    Installation length 65 mm
    Without mounting Yes
    Valve construction Valve complete
    Paino 0,118000 kg
    Näytä koko taulukko Pienennä taulukko

    Lataukset

    Tietolehtiset

    Kuvaus
    Tiedostokoko
    Kieli / Maa
    DTS Type 6407 data sheet | Servo-assisted piston valve 906,8 kB EN / EU
    DTS Typ 6407 Datenblatt | Servogesteuertes Kolbenventil 897,4 kB DE / DE

    Käyttäjän oppaat

    Kuvaus
    Tiedostokoko
    Kieli / Maa
    MAN Operating Instructions Type 6407 | 2/2-way solenoid valve 853,4 kB EN / EU
    MAN Bedienungsanleitung Typ 6407 | 2/2-Wege-Magnetventil 857 kB DE / DE
    MAN Manuel d'utilisation Type 6407 | Électrovanne 2/2 voies 863 kB FR / FR

    EU-selvitys

    Kuvaus
    Tiedostokoko
    Kieli / Maa
    ABD EU-DoC|EU Declaration 2,7 MB EN,FR,DE

    Oma vertailulistani