Suoratoiminen 2/2-tie magneettiventtiili
Tyyppi 6027 / Tunnistenumero 267390
Tuotekuvaus
Tyypin 6027 venttiili on suoratoiminen mäntäventtiili. Hitsattu karaputki parantaa tiiveys ja paine-kestoa. Erilaiset kalvomateriaalit ovat valittavissa sovellusten mukaisesti. Kelat puristetaan kemiallisesti erittäin kestävällä epoksilla. Käytönaika tehonoton vähentämiseksi saatavilla on "kick and drop" -elektroniikka (pistoke 2511). Lisävarusteena saatava liukurengaslaakeri nostaa käyntiaikaa kuivilla kaasuilla. Korkeapainesovelluksissa käytetään siihen soveltuvia tiivistystekniikoita. Standardin DIN EN 17301-803, muoto A, mukaisilla sähköpistokkeilla venttiilit täyttävät suojausluokan IP65 vaatimukset.
- Tavaroiden koodit
- 84818079
- Maa
- DE
Teknisiä ominaisuuksia
Nimi |
Arvo |
Yksikkö |
---|---|---|
Type | 6027 | |
Operation | direct-acting | |
Actuator type | Plunger valve | |
Main valve operating principle | Globe valve | |
Switch function | on/off | |
Media separation | No | |
Valve function | B - normally open - inlet port 1 (P/NO) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Flow | Above seat | |
Nominal pressure min | 0 | bar |
Nominal pressure max (gas) | 16 | bar |
Nominal pressure max (liquid) | 16 | bar |
Main valve orifice 1 (P) (mm) | 3 | mm |
Main valve orifice 1 (inch) | 1/8 inch | |
Kv value (water) | 0,28 | m3/h |
Main valve wetted material | Brass | |
Port connection 1 type | Flanged | |
Port connection 1 flange | Bürkert flange 40 x 40 version B1 | |
Port connection 2 type | Flanged | |
Port connection 2 flange | Bürkert flange 40 x 40 version B1 | |
Valve seat material | Brass | |
Seat seal material category | Elastomer | |
Seat seal material | FKM (Fluor rubber) | |
Sealing toward outside material | FKM (Fluor rubber) | |
Temperature environment min | -10 | °C |
Temperature environment max | 55 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 140 | °C |
Voltage / rated voltage | 12 | V |
Voltage / rated voltage | 12 | V |
Voltage tolerance negative | 10 | % |
Voltage tolerance positive | 10 | % |
AC voltage | No | |
DC voltage | Yes | |
Battery voltage | Yes | |
Rated power DC | 21 | W |
Reduced power DC | 21 | W |
Rated power consumption | 16 | W |
Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
Electrical connection number of contacts | 2 + Grounding conductor | |
Cable plug in delivery | not included | |
Electrical connection position | in direction of flow left | |
Protection type (IP max. with suitable connector) | IP65 | |
Coil type | placed on top | |
Coil insulation material (encasement) | Epoxy | |
Coil size | 42 | mm |
Coil wiring overvoltage protection | without | |
Coil wiring rectifier | No | |
Coil wiring polarity recovery diode | No | |
Coil special feature | for high temperatures | |
Thermal insulation class of the actuator | H | |
Nominal operation/Duty cycle | 100 | % |
Switch time open min | 20 | ms |
Switch time open max. | 30 | ms |
Switch time close min | 50 | ms |
Switch time close max. | 80 | ms |
Valve setting opening time | No | |
Valve setting closing time | No | |
Back-pressure-resistant version | No | |
Vacuum version | No | |
Analysis version | No | |
Oxygen version | No | |
Oil burner valve | No | |
Steam version | No | |
Low-noise version | No | |
Main valve with integrated screen | No | |
Valve construction | Valve complete | |
Paino | 0,854000 | kg |