Bürkert
Apuohjattu 2/2-tie mäntäventtiili
Tyyppi 6240 / Tunnistenumero 294714
Tuotekuvaus
Tyypin 6240 venttiili on servo-ohjattu mäntäventtiili. Venttiili avautuu 0-paine-erolla. Hitsattu karaputki parantaa tiiveys ja paine-kestoa. Erilaiset kalvomateriaalit ovat valittavissa sovellusten mukaisesti. Rungon muodon ja pintamateriaalin ansiosta maksimaaliset läpivirtausarvot. Kelat pinnoitetaan kemiallisesti erittäin kestävällä epoksilla. Lisävarusteena saatava liukurengaslaakeri nostaa käyntiaikaa kuivilla kaasuilla. Käytönaikan tehonoton vähentämiseksi saatavilla on "kick and drop" -elektroniikka (pistoke 2511). Standardin DIN EN 17301-803, muoto A, mukaisilla sähköpistokkeilla venttiilit täyttävät suojausluokan IP65 vaatimukset.
- Tavaroiden koodit
- 84818079
- Maa
- DE
Teknisiä ominaisuuksia
Nimi |
Arvo |
Yksikkö |
|---|---|---|
| Type | 6240 | |
| Operation | force-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (gas) | 16 | bar |
| Nominal pressure max (liquid) | 16 | bar |
| Main valve orifice 1 (P) (mm) | 6 | mm |
| Main valve orifice 1 (inch) | 1/4 inch | |
| Kv value (water) | 0,6 | m3/h |
| Main valve wetted material | Brass | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/4 | |
| Valve seat material | Brass | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 140 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| AC voltage | No | |
| DC voltage | Yes | |
| Battery voltage | No | |
| Rated power DC | 12 | W |
| Reduced power DC | 10 | W |
| Rated power consumption | 10 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | not included | |
| Electrical connection position | In direction of flow right | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 32 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Coil special feature | for high temperatures | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 20 | ms |
| Switch time close min | 40 | ms |
| Switch time close max. | 50 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control seal material | FKM (Fluor rubber) | |
| Low-noise version | No | |
| Core guide | Sliding ring | |
| Sliding ring material | PTFE (Polytetrafluorethylene) | |
| Main valve with integrated screen | No | |
| Installation length | 40 | mm |
| Valve construction | Valve complete | |
| Paino | 0,308000 | kg |
| Hyväksyntätyyppi | ||
| Sertifiointityyppi |
Voidaan yhdistää seuraavien tuotteiden kanssa
Sovellukset ja työkalut
Lataukset
Tietolehtiset
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
Solenoid valve, NC | 1,6 MB | EN / US |
|
|
Type 6240 data sheet | servo-assisted piston valve | 1,8 MB | EN / EU |
|
|
Typ 6240 Datenblatt | servogesteuertes Kolbenventil | 1,8 MB | DE / DE |
Käyttäjän oppaat
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6013 | PX04 Use in the explosion-hazard area | 138,7 kB | EN,FR,DE / EU |
|
|
Additional manual Type AC10 | Solenoid coil AC10, ATEX approval | 1,5 MB | EN / EU |
|
|
Additional manual Type AC19 | Solenoid coil AC19, II 2G/D Ex approval | 1,6 MB | EN / EU |
|
|
Operating Instructions Type 6240 | 2/2-way servo solenoid valve | 1,6 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1,3 MB | EN,FR,DE / EU |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1,2 MB | IT / IT |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1,4 MB | PT / BR |
|
|
Manual de usuario Tipo 6240 | Válvula de émbolo de 2/2 víasservocontrolada | 584 kB | ES / ES |
|
|
Manuel supplémentaire Type AC10 | Bobine magnétique AC10, homologation ATEX | 1,6 MB | FR / FR |
|
|
Manuel supplémentaire Type AC19 | Bobine magnétique AC19, homologations II 2G/D Ex | 1,7 MB | FR / FR |
|
|
Zusatzanleitung Typ AC10 | Magnetspule AC10, ATEX Zulassung | 1,5 MB | DE / DE |
|
|
Zusatzanleitung Typ AC19 | Magnetspule Typ AC19, II 2G/D ExZulassung | 1,6 MB | DE / DE |
EU-selvitys
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 3,6 MB | EN,FR,DE |
Toimiva malli
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
3D-Animation - 6240 | 2,7 MB | EN |
Mainoslehtiset ja luettelot
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
4,3 MB | EU | |
|
|
The compact power valve. | 494,8 kB | EN / EU |
|
|
Solenoid valves for safety in your plant | 786,8 kB | EN / EU |