Paineilmaohjattu 2/2-tie-istukkaventtiili
Tyyppi 2012 / Tunnistenumero 152785
Tuotekuvaus
Esiohjatussa istukkaventtiilissä on paineilmaohjattu mäntätoimilaite ja 2/2-tie-istukkaventtiilirunko. Toimilaite valmistetaan vakiona PA-muovista tai – erikoisiin käyttöolosuhteisiin soveltuvasta – PPS-kestomuovista. Itsesäätyvä tiivistysholkki on erittäin tiivis ja toimii luotettavasti. Näihin huoltovapaisiin ja vankkarakenteisiin venttiileihin on saatavana kattava valikoima lisävarusteita, kuten asentonäyttöjä, nostonrajoittimia tai käsiohjaukseen tarkoitettuja osia.
- Tullikoodi
- 84818073
- Maa
- DE
Teknisiä ominaisuuksia
Nimi |
Arvo |
Kpl. |
---|---|---|
Type | 2012 | |
Product sub-group | On/off valves | |
Actuator version | Classic | |
Main valve operating principle | Globe valve | |
Valve piloting type | Pneumatic | |
Nominal pressure min | 0 | bar |
Nominal pressure max | 10 | bar |
Control pressure min | 4,5 | bar |
Control pressure max | 6 | bar |
Control pressure vacuum | No | |
Temperature environment min | -10 | °C |
Temperature environment max | 50 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 180 | °C |
Kv value (water) | 110 | m3/h |
Nominal pressure (DIN EN 1333) | PN 25 | |
Nominal Pressure (DIN EN 1759) | Class 150 | |
CIP capable | Yes | |
SIP capable | Yes | |
Control function | A - normally closed (NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Valve construction | Valve complete | |
Seat seal material category | Plastics | |
Seat seal material | PTFE (Polytetrafluorethylene) | |
Orifice | 80 | mm |
Body nominal size | 80 | mm |
Body nominal size (IN) | 3 inch | |
Valve body material category | Metals | |
Valve body material | Stainless steel | |
Valve raw body manufacture | cast | |
Valve body surface treatment internal | unmachined | |
Valve body surface treatment external | untreated | |
Port connection 1 type | Weld end | |
Port connection 1 pipe standards 1 | DIN 11850 R2 | |
Port connection 1 pipe standard 2 | DIN 11866 serie A | |
Port connection 1 size DN | DN 80 | |
Port connection 1 inner diameter (mm) | 81 | mm |
Port connection 1 wall thickness (mm) | 2 | mm |
Port connection 1 outer diameter (mm) | 85 | mm |
Flow | Below seat | |
Interface to actuator | metric | |
Actuator size | 175 | mm |
Actuator material | PA (Polyamide) | |
Control air connection material | Stainless steel | |
Control air connection type | Internal thread | |
Control air connection thread type | G | |
Control air connection diameter (inch) | 1/4 inch | |
Control air connection 1 pre-mounted | Plug | |
Control air connection 2 pre-mounted | Plug | |
Control air hole diameter | 3 | mm |
Control air connection position | in line direction | |
Control cone | No | |
Actuator increased chemical resistance | No | |
O-ring between cover and bush | No | |
Position monitoring via magnetic piston | No | |
Seal nipple body material | Graphite | |
Packed seal enclosed | Yes | |
Oxygen version | No | |
Vacuum version | No | |
Additional manual actuation included | No | |
Manufacturer´s test certificate 3.1 included | No | |
Paino | 20,9 | kg |
Hyväksyntätyyppi | , | |
Sertifiointityyppi | , , , |
Voidaan yhdistää seuraavien tuotteiden kanssa
Sovellukset ja työkalut
Ladattavat materiaalit
Datalehdet
Käyttöohjeet
EU:n vaatimustenmukaisuusvakuutus
3D animaatiot
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
---|---|---|---|
![]() |
3D-Animation - Actuator CLASSIC | 2 MB | EN |
![]() |
3D-Animation - Antrieb CLASSIC | 2 MB | DE |