Pneumaattinen 2-tiesuoraistukkasäätöventtiili ELEMENT
Tyyppi 2301 / Tunnistenumero 335957
Tuotekuvaus
Pystyistukkaisen säätöventtiilin tyyppi 2301 täyttää Bürkert-ajatusmallin mukaisesti kaikki käytännön vaatimukset myös vaativissa käyttöolosuhteissa. Itsesäätyvä karan tiiviste vaihdettavalla tiivistepakalla varmistaa pitkän käyttöiän ja tiiviyden. Jokaiseen suoraistukkaiseen venttiilirunkoon voidaan asentaa enintään 5 eri kokoista säätökeilaa. Säätökara-istukkayhdistelmien ominaiskäyrä on luotettava ja tarkka virtauksen muuttuessa. Säätökartiot ovat haponkestävää terästä ja siihen on saatavana myös kestävä PTFE- tai PEEK-tiiviste, joka sulkee tiiviste vuotoluokan III, IV tai VI mukaisesti. Toimilaitteen rakenne mahdollistaa automaatioyksiköiden helpon integroinnin erilaisiin järjestelmiin sähköpneumaattisesta asennonsäätimestä prosessinsäätimeen. Erittäin integroidulla venttiilin ja automaatioyksikön järjestelmällä saavutetaan kompakti ja sileäpintainen muoto, integroidut ohjausilmakanavat, suojausluokka IP65/67 ja kemiallinen kestävyys on erittäin hyvä.
- Tullikoodi
- 84818073
- Maa
- DE
Teknisiä ominaisuuksia
Nimi |
Arvo |
Kpl. |
---|---|---|
Type | 2301 | |
Product sub-group | Process control valves | |
Actuator version | ELEMENT | |
Main valve operating principle | Globe valve | |
Valve piloting type | Pneumatic | |
Nominal pressure min | 0 | bar |
Nominal pressure max | 25 | bar |
Control pressure min | 5,6 | bar |
Control pressure max | 7 | bar |
Control pressure vacuum | No | |
Temperature environment min | -10 | °C |
Temperature environment max | 60 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 125 | °C |
Kv value (water) | 37 | m3/h |
Nominal pressure (DIN EN 1333) | PN 25 | |
Nominal Pressure (DIN EN 1759) | Class 150 | |
CIP capable | Yes | |
SIP capable | Yes | |
Control function | A - normally closed (NC) | |
Fluidic port connection number | 2 | |
Valve function manual actuation | No | |
Valve construction | Valve complete | |
Seat seal material category | Metals | |
Seat seal material | stainless steel | |
Orifice | 50 | mm |
Body nominal size | 50 | mm |
Body nominal size (IN) | 2 inch | |
Valve body material category | Metals | |
Valve body material | Stainless steel | |
Valve raw body manufacture | cast | |
Valve body surface treatment internal | unmachined | |
Valve body surface treatment external | untreated | |
Port connection 1 type | Weld end | |
Port connection 1 pipe standards 1 | ISO 4200 | |
Port connection 1 pipe standard 2 | DIN 11866 serie B | |
Port connection 1 pipe standard 3 | DIN EN ISO 1127 | |
Port connection 1 size DN | DN 50 | |
Port connection 1 inner diameter (mm) | 56,3 | mm |
Port connection 1 wall thickness (mm) | 2 | mm |
Port connection 1 outer diameter (mm) | 60,3 | mm |
Flow | Below seat | |
Actuator size | 130 | mm |
Actuator material | PPS (Polyphenylene sulphide) | |
Control air connection material | Plastic | |
Control air connection type | Interface ELEMENT | |
Control air connection diameter (mm) | 6 | mm |
Control air connection 1 pre-mounted | not equipped | |
Control air connection 2 pre-mounted | not equipped | |
Control air connection position | in line direction | |
Control cone | Yes | |
Swivel plate | no | |
Actuator increased chemical resistance | No | |
O-ring between cover and bush | No | |
Position monitoring via magnetic piston | No | |
Position indicator | without | |
Seal nipple body material | Graphite | |
Packed seal enclosed | Yes | |
Vacuum version | No | |
Additional manual actuation included | No | |
Manufacturer´s test certificate 3.1 included | No | |
Paino | 7,555 | kg |
Hyväksyntätyyppi | , , | |
Sertifiointityyppi | , , , , |