Tyyppi 8228 - Inductive conductivity meter, ELEMENT Design
Tyyppikuvaus
The Bürkert inductive Type 8228 conductivity meter is used in many industrial processes where measurements are required in aggressive or concentrated media such as acids, alkalis or liquids with high salt contents and a wide measuring range. This can concern applications like cooling water monitoring (i.e. dilution control), industrial water treatment or the preparation and identification of cleaning liquids, for example in CIP (Cleaning in Place) processes. The device Type 8228 is available in two variants. The first one, the so-called ELEMENT standard is proposed either with two adjustable outputs (one digital and one analogue output) or with four adjustable outputs (two digital and two analogue outputs) and can be equipped with a display. The display is only necessary for start-up, configuration (e.g. measuring range, units, calibration, thresholds) or as a display of process values. The second variant, the so-called ELEMENT neutrino is a device without display, with a digital communication mode that can communicate either in IO-Link or in büS (Bürkert system bus based on CANopen). Both variants are available with a process connections either via a G 2 union nut for installation into a fitting Type S020 which is connected to the process, or via a clamp 2" according to ASME BPE (clamp 1.5" on request) for CIP applications.
- Perfect for concentrated liquids and wide conductivity ranges
- Pre-parameterized variants available for direct start-up
- Measuring device for direct connection to the control level (PLC) via analogue 4…20 mA signal or digital IO-Link or Bürkert system bus (büS)/CANopen communication
- Simulation of process values for diagnostics
- Variants of the sensor available in PP, PVDF or PEEK
Valitaksesi oikean tuotteen ja löytääksesi asianmukaiset ohjeistukset, tutustu tekniseen esitteeseen.
Voidaan yhdistää seuraavien tuotteiden kanssa
Sovellukset ja työkalut
Ladattavat materiaalit
Datalehdet
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
Data sheet Type 8228 | Inductive conductivity meter | 3,1 MB | EN / EU |
|
|
Data sheet Type S020 | Insertion fitting for flow or analytical measurement | 2,3 MB | EN / EU |
|
|
データシート タイプ 8228 | 誘導性導電率計、ELEMENTデザイン | 3,3 MB | JA / JP |
|
|
数据表 8228 型 | 感应式电导率变送器，ELEMENT 设计 | 3,5 MB | ZH / CN |
|
|
Datenblatt Typ 8228 | Induktives Leitfähigkeitsmessgerät | 3,1 MB | DE / DE |
|
|
Datenblatt Typ S020 | Insertion-Fitting für Durchfluss-/Analysemessungen | 2,4 MB | DE / DE |
|
|
Fiche technique Type 8228 | Conductivimètre inductif | 3,1 MB | FR / FR |
|
|
Fiche technique Type S020 | Raccord Insertion pour les mesures de débit ou d'analyse | 2,3 MB | FR / FR |
Käyttöohjeet
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
Accessory Type 8026 8036 SE36 8202 8222 8228 ELEMENT | Display module | 788,9 kB | EN / EU |
|
|
Operating Instructions Type 8228 ELEMENT neutrino IO-Link büS | Conductivity meter | 2,2 MB | EN / EU |
|
|
Operating Instructions Type 8228 ELEMENT | Inductive conductivity meter | 3,2 MB | EN / EU |
|
|
使用说明书 型号 8228 | 感应式电导率变送器 | 3,4 MB | ZH / CN |
|
|
取扱説明書 タイプ 8228 ELEMENT | 誘導性導電率計 | 3,5 MB | JA / JP |
|
|
操作手冊 Type 8228 | 磁感式導電度計 | 3,4 MB | ZH / TW |
|
|
사용 설명서 타입 8228 ELEMENT | 유도식 전도도계 | 2,8 MB | KO / KR |
|
|
Accessoire Type 8026 8036 SE36 8202 8222 8228 ELEMENT | Module d'affichage | 789,1 kB | FR / FR |
|
|
Bedienungsanleitung Typ 8228 ELEMENT neutrino IO-Link büS |Leitfähigkeits-Messgerät | 2,2 MB | DE / DE |
|
|
Bedienungsanleitung Typ 8228 ELEMENT | Induktives Leitfähigkeitsmessgerät | 3,3 MB | DE / DE |
|
|
Kullanım Talimatları Tip 8228ELEMENT | Endüktif iletkenlik ölçer | 2,5 MB | TR / TR |
|
|
Manual de Operação | ELEMENT neutrino tipo 8228 | IO-Link/büS | Medidor de condutividade | 2,7 MB | PT / BR |
|
|
Manual de Operação | Tipo 8228 ELEMENT - Medidor de condutiv idade indutiva | 2,7 MB | PT / BR |
|
|
Manuel d'utilisation Type 8228 ELEMENT neutrino IO-Link büS| Conductivimètre | 2,4 MB | FR / FR |
|
|
Manuel d'utilisation Type 8228 ELEMENT | Conductivimètre inductif | 3,2 MB | FR / FR |
|
|
Tipo 8228 ELEMENT Medidor de conductividad inductivo | 3,2 MB | ES / ES |
|
|
Zubehör Typ 8026 8036 SE36 8202 8222 8228 ELEMENT | Displaymodule | 789,1 kB | DE / DE |
Ohjelmistot
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
Device Description Files A.01 | 1,5 MB | ML |
|
|
Buerkert Communicator 8.3.6 | 520,6 MB | ML |
Vaatimustenmukaisuusvakuutus
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 28,6 kB | EN,FR,DE |
|
|
MDec|Food | 231,2 kB | EN,FR |
|
|
MDec|Food 8228 JAPAN | 128,3 kB | EN,FR |
|
|
MDec|Food 8228 PEEK | 230,7 kB | EN,FR |
|
|
EU-DoC|EU Material Compliance | 40,2 kB | EN |
|
|
EU-DoC|EU Material Compliance | 41,7 kB | FR |
|
|
EU-DoC|EU Material Compliance | 40,9 kB | DE |
Sertifikaatit
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
IO-Link | ClassA Rev.1 | 8228 | 207,8 kB | EN |
Mainoslehtiset ja luettelot
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
|
Analytical Meters | 573,6 kB | EN / EU |
Videot
Kuvaus |
Tiedostokoko |
Kieli / Maa |
|
|---|---|---|---|
|
Sensor de Conductividad 8222 8228 | 14,2 MB | AF |